Description:

Tap-It is a three channel, logic configurable switch controller that provides three, isolated, relay-based switching circuits. The isolation helps reduce the possibilities of ground loops.

Each channel can be set to produce a momentary or latched action. This channel action is determined by internal jumper plugs.

The Momentary action can be configured as normally open (nO) or normally closed (nC). Latched action will toggle between open and closed.

Each channel has an LED for indication channel activity: red for relay open, green for relay closed.

NOTE: the channel relays are rated for a maximum of 500 mA.

Tap-It can also accept external switch pedals. Plugging a switch pedal into an AUX input will override the related, internal foot switch.

NOTE: the external switch pedal must provide a HIGH to LOW signal for Tap-It to respond accordingly.

Suggested Uses:

Tap-It is well suited for:

• tap-tempo for time-based and modulation effects

• amplifier channel switching

• keyboard sustain pedal

• effect pedal function change

Specifications:

Power Supply: 9 V to 12 V DC

Current Draw: 90 mA @ 9 V (all relays & LEDs on)

Switching Current: 500 mA

DC Connector Size: 2.1 mm (standard BOSS)

DC Connector Polarity: Universal Input DC (either polarity)

I/O Connectors: 1/4” jack

Dimensions: 10.0 L x 2.8 W x 1.4 H inches

Weight: 17.7 oz